God of war

     The third generation sand making machine is the kry equipment in sand production line, the third generation sand making machine is strongly adaptable to a variety of materials that can be broken, so it has a wide range of applications. In order to improve the efficiency of third generation sand making machine and protect the device ae well as extend its life, we jointly study measures. Firstly, it is the requirements of the nature, grades such as grain type, grain size requirements of materials. No materials that exceeds the fixed size enter the sand making crushing chamber. The particle size of the material in a certain degree has impact on sand making products cube knot and crushing ratio. As concrete and asphalt aggregate locking state between material particles, small voids between the particles is made of concrete, which would ensure more firmly , and displacement phenomenon does not occur, while also reduces the amount of use of the cement, reduces production costs. Therefore, strict control of materials, in order to ensure good output quality of the finished product and application effect. 

     The third generation sand  maker has strict demand for material size, and another is that too much material entering the crushing chamber will aggravate the wear of the impeller assembly, the impeller imbalance will cause the impeller wear seriously, so that it led to the sand blocking material failure, and may even cause some damage to the components. We should strictly control the size of the feed particle size, at the same time to ensure a continuous and uniform feeding, mining will not cause blocking materials or idling caused by high energy consumption, reduce production efficiency. 

Hongxing Machinery is a famous professional manufacture of various types of crushing equipment, grinding equipment and other high-tech enterprises of the mineral processing equipment. Hongxing has experienced a long history of development, we have professional technology, we produce the equipment with first-rate quality, on what we depend to win our reputation.

 

      Equipment has a wide variety of models, each model crusher equipment has its own characteristics, Hongxing over the years  invested a lot of money on the development of environmental protection and energy saving equipment, since the products are invested in the market, which has been well received by the trust of our customers. Hongxing impact crusher and stone crusher uses advanced foreign technology, has the advantage of environmental protection and energy saving. Products are sold in South America, Europe, Africa and other places, has a good business reputation in foreign. Impact crusher and stone crusher are commonly used in gravel production line, impact crusher is used to crush brittle materials of medium hardness, due to the emergence of some of the wear-resistant materials, it has been used in some metal plants. The concentrator has been applied. In contrast impact crusher has larger crushing ratio, a more wide application range. Comparative analysis of the impact crusher, What are the advantages? Impact crusher can be equipped with a heating device between feed chute and counterattack board  to prevent the adhesion of the material, thus crush large water content materials, and less prone to clogging.

     China’s mining machinery is making rapid development, energy saving and environmental protection has become a major trend of the development of the crusher equipment in China, so many manufacturers put a lot of focus on energy saving and environmental protection, a lot of investors are to focus on this aspect. Then for crusher manufacturers, how to save investment costs, both to meet the production needs, as well as lower energy consumption, environmental protection and energy saving while new trends, Hongxing scientifically select crusher models by carrying out a comprehensive and in-depth understanding of the origin of the raw materials for processing. 

  

     Hongxing new efficient hydraulic cone crusher is the introduction of the latest technology in Germany and developed the world’s advanced level of high-energy, which not only improves the production capacity and crushing efficiency, but also to expand the range of applications, from limestone to basalt, from stone production to a variety of ore crushing, it can  provide unparalleled crushing performance in the ultra-crushing operations in a variety of in broken chronology. Cone crusher is suitable for crushing medium hardness above ore and rock, hard rock, slag, ore crushing of raw materials, as well as fine crushing and superfine crushing industries such as metallurgy, construction, chemical, road construction and silicate, refractories. The cone crusher has large crushing ratio, uniform product size, simple structure, reliable operation, easy maintenance, low operating cost characteristics. The cone crusher is widely used in mining, metallurgy, building materials, road, railway, water conservancy and chemical industry and many other industries, crushing various materials with compressive strength less than 320 MPa. 

     You should confidential regularly check the quality of hydraulic oil to keep the hydraulic oil clean. In the inspection of the quality of the hydraulic oil, you should mainly check three aspects: First, the degree of oxidation of the cone crusher equipment oil hydraulic, in use, due to the changes of temperature, oxygen in the air and sunlight will gradually be oxidation, its viscosity and other properties change. The degree of oxidation, usually from the color of the hydraulic oil, the smell of the judgment. If hydraulic oil color is dark brown, and the bad smell that has been oxidized. The deeper brown, bad smell is more concentrated, the more powerful the degree of oxidation. At this point, it should be replaced with new oil. Second, the moisture-containing hydraulic oil, if it is mixed into water, it will reduce its lubricating properties, corrosion metals. To judge the degree of hydraulic oil mixed with water, there are usually two ways, according to its color and odor changes, such as hydraulic oil, milky white color, the smell has not changed, and it has been mixed too much water.

     Currently, the fewer areas in domestic over the sand and gravel production have higher degree of mechanization, most of the production was in a backward state, low efficiency, poor quality, high cost, have a certain impact on the quality of the construction work. Especially land, river-shaped gravel businesses, their production process uses two sections of a closed-circuit crushing process (individual enterprises has been transformed in recent years), and, first and second stage crushing devices are jaw crusher, other broken machines is used very little. 

     The small gravel plants that domestic production is less than 50t accounted for the absolute majority. Basically all of them adopts single-stage or two-stage jaw crusher crushing production process, and it is very simple. and product quality varies, which can not meet the demand of various industries for mechanisms sand, the National sand and gravel industry urgently solved the current technology, equipment, backward technology. Successfully listing of third generation sand maker breaks the embarrassed situation of backward sand making technology and opened a new era of mechanism sand. On the basis of traditional sand making machine, the third generation sand making machine increases counterweight wheel, thus saving energy, increasing the kinetic energy. Production efficiency has been greatly improved, and the counter plate adjusting device makes the fineness adjustment more convenient, we do not need to open the case, you can adjust the total design of the two counter plate adjustment device, eliminating the need to use the crane trouble. Traditional sand making machine only has open observation door in the rear, the new third-generation sand maker has observed door on its side, which is more conducive to the maintenance and observation of the functioning of the equipment.

     Hongxing Machinery is a famous professional manufacture of various types of crushing equipment, grinding equipment and other high-tech enterprises of the mineral processing equipment. Hongxing has experienced a long history of development, we have professional technology, we produce the equipment with first-rate quality, on what we depend to win our reputation.

     The purpose of the third generation sand maker is the equipment that crushes material to 5 mm particle size, in the engineering field, it is the ideal equipment of the mechanism sand (artificial sand), cushion material, asphalt concrete and cement concrete aggregate. In the mining sector, the third generation sand making machine is widely used in grinding process, it can produce large amounts of iron ore fines, reducing the high cost of grinding load. Third generation sand making machine is widely used in a variety of ores, cement, refractory bauxite clinker, carborundum, glass raw material and high hard, extra-hard materials in crushing the field. It is more widely used in mechanism building sand, stone and various metallurgical slag crushing, it has more high-yield efficacy compared with other types of crusher. Due to the third generation sand making machine excellent low wear characteristics, the device is also used for high abrasive and secondary disintegration crushing production. In addition, since the zero pollution of the product, and the third generation sand maker can be well adapted to the production capacity in the production of glass quartz sand and other high purity materials,10-500t / h of range, the third generation sand making machine can fit almost any production requirements.

     The third generation sand making machine has been used for a long time due to lack of lubricant agent or materials and dust pollution, which will make devices bearing device produce abnormal heating phenomenon, check promptly and shut down to avoid equipment bearing overheating causing serious production accidents. Bearing heating reasons for third generation sand making machine : In the use process of the third generation sand making machine, the lack of lubricant agent will cause bearing severe friction phenomenon at work after serious wear and tear caused by damage to the bearing heating; third generation sand maker has strong applicability of the work environment, efficient production can be carried out  in different production environment.